TM 9-2920-258-30&P
4
Scribe a mark, for realignment, on stator assembly (2) and drive end housing (10).
5
Open tabs on 6 tabbed Iockwashers (11) and remove 12 screws (12), 12 Iockwashers (13), 6 tabbed
Iockwashers (11 ) and cover plate (14).
6
Remove two drive blocks (15), spline shaft and cam assembly (16) and snap ring (17).
7
Remove 12 socket head screws (18) and 12 Iockwashers (19).
8
Remove drive end housing (10) and block holder assembly (20) with key (21).
3-5