TM-9-2990-205-34-P

TURBOSUPERCHARGER MODEL 5HDR

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

SEPTEMBER 2005
TM-9-2990-205-34-P

  TM-9-2990-205-34-P - Page 19 of 128

TM 9--2990--205--34&P
EQUIPMENT DESCRIPTION AND DATA -- CONTINUED
0002 00
EQUIPMENT DATA
1. General.
Model
5HDR
................................................................................
Mounting
Universal
...........................................................................
2. Specifications.
Maximum revolutions per minute
65,000
........................................................
Diameter of compressor air inlet opening
6.50 in.
.................................................
Diameter of compressor air outlet opening
3.62 in.
................................................
Diameter of each turbine exhaust inlet opening
3.00 in.
............................................
Diameter of turbine exhaust outlet opening
4.26 in.
...............................................
Oil inlet pressure to bearing housing
40 to 70 psi
.................................................
Oil oulet pressure from bearing housing
Crankcase pressure
.......................................
IDENTIFICATION PLATE
The turbosupercharger identification plate is located on the bearing housing above the mounting leg.
03i451m
TURBO
ASS’Y
Location of Turbosupercharger Identification Plate.
END OF WORK PACKAGE
0002 00--5/6 blank


Back to Top