TM-9-3990-260-14-P

CONTAINER ROLL-IN/OUT PLATFORM (CROP) MODEL M3 AND MODEL M3A1

TECHNICAL MANUAL; OPERATOR’S, UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

JULY 2001

  TM-9-3990-260-14-P - Page 145 of 306

TM 9-3990-260-14&P
Table 7-1. Operator's Preventive Maintenance Checks and Services - Continued
Item
No.
Interval
Location
Item to
Check/Service
Procedure
Not Fully Mission
Capable If:
13
After
Cargo Deck
Check top surface of cargo deck (17)
for damage.
Cargo deck is damaged
enough to be unsuitable
for loading.
14
After
Container
Transport Locks
Ensure latch (18) and shims (19) are in
fully retracted position.
15
After
Container
Transport Locks
a.
Ensure latch (18) moves freely in
bracket (20).
Either container transport
lock is unserviceable.
b.
Ensure locking pin (21) is not
bent or damaged.
c.
Ensure cables (22) of locking pin
and latch are intact.
d.
Ensure four shims (19) are intact.
16
After
Tools
Ensure tools are in PLS truck stowage
box (refer to TM 9-2320-364-10).
17
After
Bumper
Ensure both bumpers (23) are available
and serviceable.
Either bumper is missing
or damaged beyond use.
18
After
A-Frame
Assembly Pins
(Rear Pins)
Ensure castle nuts on rear pins are
serviceable.


Back to Top