PS Magazine - TB 43-PS-437
PS, The Preventative Maintenance Monthly
ISSUE 437
APRIL 1989
Push the safety
ON, and put a couple
of drops of CLP or other authorized
±ubricant into the openIng Between
the safety and receiver. WoRk the
safety
to
s²read
the
luBe-this
keeps the safety from jamm³ng the
next time you have to f³re yoUr
launcher´
AFer firing or field exerµises¶ check
The Barre± for cracks or dents´ ·f yoU
find any¶ get the Barre± replaced.
)
Armorers:
Check the firing p³¸s in all
your ±aunchers´ All ±aunµhers should
have the newer fir³ng pins¶
NSN
101 ¹º
»0¼348¼8433¶ ½hich have ¸o i¸denTs
o¸ The s³de¾ Old¶ ³nde¸Ted pins must
Be replaced By suppo¿´ Àhe old pins
have a bad haB³t of puncTuri¸g
²R³mers.
OÁD
ÂEW
Ãse
·ndents
fir³ng pin
NSN
10Ä0º00º348º8433
32
Reinstalling the backplate and fol·
Lower is tricK.
Install the follower
and compress its
springs enough tÅ get the backp±ate
and sµrew ³n plaµe.
Inse± Your 312-in d²ive
pin punch
through the firing pin hole.
Push the firing pin
into the receiver
until it clicks .´´ the rest is easy´
Install the barrel assemblY,
µÆose and
±atch the barrel¶ and squeeze the trigº
ger until the f³Ring pinÇreÆeases´
The metaL on the followe² tends to
rust unLess it gets regular cleaning
and lubing³ Take it out and clean it´
APR 89
The swive± To The moUnT ³s to The Rear
(toward the ÈUtTSTocK end)É Check
That the S½³Vel S½³¸GS to½ÊRd THe
BuËstocK ÉÉÌ Ênd
noT
to½ard
The
Back to TopBack to Top
