MWO-9-2320-272-20-4
MODIFICATION OF 5-TON M936 AND M936A1 SERIES TRUCKS
WRECKER AUTOMATIC THROTTLE KIT; MODIFICATION WORK ORDER
JULY 1994
MWO-9-2320-272-20-4 - Page 2 of 20
MWO 9-2320-272-20-4
1. PURPOSE.
The purpose of this modification is to provide an automatic throttle kit which increases engine RPM’s
automatically during operation of the crane.
2.
3.
PRIORITY.
This modification is classified as ROUTINE.
END ITEM TO BE MODIFIED.
a. 5-ton, 6x6, M936 and M936A1 series trucks.
NOMENCLATURE
NSN
EIC
PART
CAGE
MODEL
NO.
CODE
NO.
Truck, Medium Wrecker
BTF
8736988
19207
M936
Truck, Medium Wrecker
BSG
8750163
19207
M936A1
4.
5.
6.
b. Vehicle’s National Stock Number (NSN) will not change as a result of this MWO.
MODULE TO BE MODIFIED.
Not applicable.
PARTS TO BE MODIFIED.
Not applicable.
APPLICATION.
a. Time compliance statement: MWO effective date is 1 September, 1993, and completion date is
1 September, 1997.
b. The lowest level of maintenance authorized to apply the MWO is unit maintenance.
c. Work force and man-hour requirements for application of the MWO to a single unit, end item,
or system are as follows:
REQUIREMENTS
WORK FORCE/SKILLS
MAN-HOURS
Two Wheeled Vehicle Mechanics
4
(MOS 63B) or equivalent
Total man-hours required for a single application of this
MWO is 8 hours.
d. There is no other MWO that must be applied prior to the application of this MWO.
e. There is no additional information necessary to apply this MWO.
2
Back to Top
