MWO-9-2320-279-34-1

MWO-9-2320-279-34-1 - Page 10 of 14

MWO 9-2320-279-34-1

NOTE

If gas particulate filter is not in-

stalled, install screw only.

(12) If a gas particulate kit is installed, install

hanger (40) in new hole (41) with screw

(42). If a gas particulate kit is not installed,

go to step (15).

(13) Install clip (43) and hose (44).

(14) Install valve (45), retaining ring (46), and

connector (47).

(15) Install reservoir (48) on bracket (49).

Ensure seat belt strap moves freely.

(16) Install fluid hose (50) and air hose (51) on

reservoir (46).

END OF TASK

11. CALIBRATION REQUIREMENTS.

Not applicable.

12. WEIGHT AND BALANCE DATA.

Weight and balance are not significantly affected.

13. QUALITY ASSURANCE REQUIREMENTS.

Not Applicable.

14. RECORDING AND REPORTING OF THE MODIFICATION.

Record the modification in accordance

with AR 750-10, DA PAM 738-750, DA PAM 738-751, and TB 9-1100-803-15.

15. PRODUCT IMPROVEMENT PROPOSAL (PIP) NUMBER.

This MWO is authorized by PIP number

1-89-06-4216.

16. MODIFICATION IDENTIFICATION.

Refer to paragraph 10. Three point seat belts will be

immediately noticeable to users.