MWO-9-2320-279-34-1
MODIFICATION OF M977 SERIES HEAVY EXPANDED MOBILITY TACTICAL TRUCK (HEMTT)
MODIFICATION WORK ORDER; INSTALLATION INSTRUCTIONS FOR THREE POINT SEAT BELTS
JULY 1992
MWO-9-2320-279-34-1 - Page 6 of 14
MWO 9-2320-279-34-1
10. MODIFICATION PROCEDURES.
a. Preparation for Installation of Three-Point
Seat Belt.
(4) If a gas particulate kit is installed, remove
valve (6), connector (7), and retaining ring
(8). If a gas particulate kit is not installd,
90 to step 6.
(1)
(2)
(3)
NOTE
Use existing fasteners unless
otherwise shown in procedure.
Remove two lap belts (1) in accordance
with TM 9-2320-279-20, para 16-32.
Save fasteners.
NOTE
Tag and mark hoses before
removal.
If windshield washer reservoir (2) is in-
stalled behind the passenger seat,
remove air hose (3) and fluid hose (4)
from the reservoir.
Remove reservoir (2) from bracket (5).
(5) Remove clip (9) and hose (10). Move
hose (10) out of the way.
(6) Remove screw (11) and, if installed,
hanger (12).
4
Back to Top
