MWO-9-2320-279-34-1
MODIFICATION OF M977 SERIES HEAVY EXPANDED MOBILITY TACTICAL TRUCK (HEMTT)
MODIFICATION WORK ORDER; INSTALLATION INSTRUCTIONS FOR THREE POINT SEAT BELTS
JULY 1992
MWO-9-2320-279-34-1 - Page 7 of 14
MWO 9-2320-279-34-1
(7)
(8)
(9)
Drill 1/2 inch bracket mounting hole (13)
through cab for mounting of D-loop
(in three-point seat belt kit).
Lay out new bracket mounting hole (14) as
indicated.
Center punch and drill hole (14) to 1/4
inch. Deburr hole.
(10) Remove plug (15) and drill 1/2 inch hole.
Deburr hole.
(11) Remove plug (17).
NOTE
If a hose clip and hose are attached to
the cab with the plug used in step (11),
do step (12) through (15). If a hose is
not attached, perform step (13) and pro-
ceed to paragraph b.
(12) Remove hose (18) and clip (19).
(13) Drill 1/2 inch hole (20) through cab.
Deburr hole.
(14) Lay out new plug mounting hole (21) as
indicated.
(15) Center punch and drill hole (21) to 1/4
inch. Deburr hole.
5
Back to Top
