MWO-9-2330-392-20-2
MODIFICATION OF TRAILER, CARGO: 2-WHEEL M1101 AND M1102, CHASSIS, TRAILER: 2-WHEEL
MODIFICATION WORK ORDER
MARCH 2003
MWO-9-2330-392-20-2 - Page 6 of 20
MWO 9-2330-392-20-2
6
b.
MODIFICATION PROCEDURE
1. Remove four brake master cylinder mounting bolts (
4
) holding master cylinder (
3
) to
housing (
5
) (
see Figure 2
). Do NOT disconnect hydraulic hose.
2. Separate master cylinder (
3
) from housing (
5)
(
see Figure 2
). Tie out of the way so
master cylinder does not hang by the hydraulic hose. Do NOT disconnect hydraulic hose
or in any way open the brake hydraulic system.
Retain breakaway lever spring (6) for
reinstallation (
see Figure 2a.).
Back to Top
