MWO-9-2330-392-20-2
MODIFICATION OF TRAILER, CARGO: 2-WHEEL M1101 AND M1102, CHASSIS, TRAILER: 2-WHEEL
MODIFICATION WORK ORDER
MARCH 2003
MWO-9-2330-392-20-2 - Page 9 of 20
MWO 9-2330-392-20-2
9
There are two methods that can be used to remove spare rivets from the trailer.
Method 1
: Use an abrasive cutoff wheel to cut a slot in the rivet head just above the plate
surface. Use a hammer and 3/4” (or wider) chisel to knock the remaining rivet head off
the surface. Drive the rivet body out of the hole with a punch. Take care not to grind or
gouge the aluminum plates or elongate the rivet hole
(see Figure 6 & 7).
Back to Top
