SMI-9-2320-387-14P-1
TRUCK, UTILITY: EXPANDED CAPACITY
SUPPLEMENTAL OPERATION, MAINTENANCE, AND REPAIR PARTS INSTRUCTIONS
JULY 2004
SMI-9-2320-387-14P-1 - Page 358 of 671
12-129. TROOP/CARGO WINTERIZATION FUEL CAN MOUNTING BRACKET REPLACEMENT
This task covers:
a. Removal
b. Installation
Materials/Parts
Four locknuts (Appendix G, Item 101.10)
Manual References
TM 9-2320-387-24P
a. Removal
b. Installation
1.
Remove two locknuts (1), plate (2), and two capscrews (4) from fuel can mounting bracket (5) and
left end closure (7). Discard locknuts (1).
2.
Remove two locknuts (10), washers (9), capscrews (6), and fuel can mounting bracket (5) from left
end closure (7). Discard locknuts (10).
3.
Remove two spacers (8) from lower mounting holes (3) in left end closure (7).
1.
Install two spacers (8) in lower mounting holes (3) in left end closure (7).
2.
Install fuel can mounting bracket (5) on left end closure (7) with two capscrews (6), washers (9), and
locknuts (10).
3.
Secure fuel can mounting bracket (5) and plate (2) to left end closure (7) with two capscrews (4) and
locknuts (1).
4.
Tighten two locknuts (1) and locknuts (10) to 34 lb-ft (46 N
•
m).
SMI 9-2320-387-14&P-1
12-210
Change 4
INITIAL SETUP:
Applicable Models
M1152
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Back to Top
