SMI-9-2320-387-14P-1

TRUCK, UTILITY: EXPANDED CAPACITY

SUPPLEMENTAL OPERATION, MAINTENANCE, AND REPAIR PARTS INSTRUCTIONS

JULY 2004

SMI-9-2320-387-14P-1 - Page 354 of 671

12-126. TROOP/CARGO WINTERIZATION TROOP SEAT ASSEMBLY AND BOW

REPLACEMENT (Cont’d)

b. Installation

2.

Install support assembly (16) on B-pillar (17) with three capscrews (15), washers (18), and

locknuts (19).

3.

Install troop seat assembly (9), folded in stowed position, into support assembly (16) and on

wheelhousing (14).

4.

Install front wheelhousing bracket (22) on wheelhousing (14) with two capscrews (21), washers (23),

and locknuts (24). Tighten locknuts (24) to 49 lb-ft (66 N

•

m).

5.

Install rear corner troop seat bracket (29) on wheelhousing (14) with three washers (27),

capscrews (28), washers (26), and locknuts (25). Tighten locknuts (25) to 96 lb-in. (11 N

•

m).

6.

Install troop seat assembly (9) on wheelhousing (14) with six washers (12), capscrews (13),

washers (10), and locknuts (11). Tighten locknuts (11) to 96 lb-in. (11 N

•

m).

7.

Install front bow (20), middle bow (2), and rear bow (3) on slots on outside of troop seat

assembly (9).

8.

Install plate (1) on front bow (20).

SMI 9-2320-387-14&P-1

12-206

Change 4

1.

Install block (6) on cargo bulkhead (4) with two screws (5), washers (7), and locknuts (8).

NOTE

Support assembly must be installed with narrow offset to outside

of vehicle and rounded side up.