TB-9-2300-378-14
M48 & M60 SERIES VEHICLES
TECHNICAL BULLETIN; AIR INDUCTION SYSTEM MAINTENANCE
SEPTEMBER 1985
TB-9-2300-378-14 - Page 57 of 296
TB 9-2300-378-14
(o)
Close top grille doors (TM-10).
(3) Outlet Hose (V-Band Clamp) (Fig. 3-13).
Figure 3-13. Air outlet
(a)
(b)
(c)
(d)
(e)
(f)
(g)
hose replacement (V-band clamp).
Loosen hose clamps (view A).
Remove clamps from hose.
Remove hose from elbows.
Inspect hose packing. If it is cracked, loose or dry, replace as follows:
1.
2.
3.
Remove packing and clean away adhesive.
Apply adhesive, MIL-SPEC MMM-A-1617, Type II - NSN 8040-00-152-
0063 (2.5 oz. can) or NSN 8040-00-152-0067 (6 oz. can) - in groove of
hose assembly flange.
Install new packing - NSN 5330-00-729-5049 (part no. 10870861).
Check metal flange ends for bonding to hose. If bonding is loose, replace
hose assembly.
Check V-band clamps for split bands (view B) bent or stripped T-bolts,
and damaged nuts.
Replace defective clamp NSN 5340-00-678-6178
(part no. 8711310).
Turbocharger end, NSN 4730-01-132-9086, PN 01-
1000 outlet end.
Check flat band clamp for proper installation. If not installed properly,
loosen and apply a light coat of lubricant (silicone grease MIL-G-46886)
to the area of hose where clamp will be installed, install clamp and
tighten securely.
3-37
Back to Top
