TB-9-2320-279-13-1

TECHNICAL BULLETIN; AIR CONDITIONING SYSTEM

OPERATOR’S, UNIT AND DIRECT SUPPORT MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LISTS

DECEMBER 2005

TB-9-2320-279-13-1 - Page 256 of 524

TB 9-2320-279-13-1

0028-4

AC CONDENSER REPLACEMENT - Continued

DRAFT

INSTALLATION

NOTE

Perform Step 1 if grab handle was removed.

1. Install grab handle (17) on condenser (12) with two washers (16), lockwashers (15), and screws (14).

WARNING

AC condenser assembly weighs 75 lbs. (34 kg).

Do not lift AC condenser assembly

without the aid of an assistant.

Failure to comply may result in injury to personnel

and/or damage to equipment.

2. Soldier A and Soldier B install four plates (11) and condenser (12) on driver side front fender (13) with

four lockwashers (10) and screws (9).

HEMAC057

HEMAC056