TB 9-2320-279-13-1
0045-2
AC UPPER PLENUM REPLACEMENT - Continued
DRAFT
INSTALLATION
1. Install two upper plenums (2) on cover (8) with two washers (7), lockwashers (6), and screws (5).
Do not
tighten screws (5).
2. Install two upper plenums (2) on lower plenum (4) with six screws (3).
3. Tighten two screws (5).
NOTE
Perform Step 4 if gasket was removed.
4. Install gasket (1) around outside edges of two upper plenums (2).
FOLLOW-ON MAINTENANCE
1. Install AC heater/evaporator cover (WP 0037).
END OF WORK PACKAGE
HEMAC061