TB-9-2320-279-13-1

TECHNICAL BULLETIN; AIR CONDITIONING SYSTEM

OPERATOR’S, UNIT AND DIRECT SUPPORT MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LISTS

DECEMBER 2005

TB-9-2320-279-13-1 - Page 358 of 524

TB 9-2320-279-13-1

0046-8

AC WIRING HARNESS REPLACEMENT - Continued

DRAFT

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

CAUTION

Hose shields must be positioned so that AC hoses and AC wire harness are

protected from fender, cab, and radiator.

Failure to comply may cause damage to

equipment.

NOTE

Install hose shields as noted prior to removal.

13. Install two hose shields (15) between opening between fender (16), cab (17), and radiator (18) with three

cable ties (14).

FOLLOW-ON MAINTENANCE

1. Install AC heater/evaporator cover (WP 0037).

2. Install engine side panel and close engine cover (TM 9-2320-279-10).

3. Install skid plate grille (TM 9-2320-279-20).

4. Connect batteries (TM 9-2320-279-20).

5. Check operation of air conditioning system (WP 0004).

END OF WORK PACKAGE

HEAMC090