TB-9-2320-279-13-1

TECHNICAL BULLETIN; AIR CONDITIONING SYSTEM

OPERATOR’S, UNIT AND DIRECT SUPPORT MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LISTS

DECEMBER 2005

TB-9-2320-279-13-1 - Page 430 of 524

TB 9-2320-279-13-1

0052-38

49.

Install temperature control switch (72) on heater center compartment cover (10) with nut (73).

50.

Install knob (74) on temperature control switch (72) with two screws (75).

51.

Install wire 1156 (76) from A/C wiring harness on OUT terminal of temperature control switch (72).

CAUTION

Do not puncture temperature probe.

Gas in tube will leak out if temperature probe is punctured.

NOTE

Slide temperature probe in heater/evaporator slowly.

Temperature probe must slide into evaporator

core.

52.

Install temperature probe (77) in heater/evaporator (3).