TB-9-2320-279-13-P-2

TECHNICAL BULLETIN; CREW PROTECTION KIT

OPERATOR’S, UNIT AND DIRECT SUPPORT MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LISTS (RPSTL)

SEPTEMBER 2005

TB-9-2320-279-13-P-2 - Page 426 of 460

II

106700-7

Rev. -

t.

Install four washers (3/8 ID) and locknuts (3/8 – 16) on the top studs of the

Rear Studplate (P/N 106780-2).

Hand-tighten the locknuts.

u.

Install four washers (3/8 ID) and locknuts (3/8 – 16) on the rear bolts through the

Rear Cab Armor Panel.

v.

Remove the locknuts loosely securing the Front Studplate (P/N 106780-1) to the

Roof Armor Panel.

w.

Install the driver’s-side Roof Panel Front Bracket (P/N 106735-1) over the exposed

studs of the Front Studplate (P/N 106780-1) (See Figure 43).