TB-9-2320-279-13-P-2

TECHNICAL BULLETIN; CREW PROTECTION KIT

OPERATOR’S, UNIT AND DIRECT SUPPORT MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LISTS (RPSTL)

SEPTEMBER 2005
TB-9-2320-279-13-P-2

  TB-9-2320-279-13-P-2 - Page 48 of 460

TB 9-2320-279-13&P-2
OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) - CONTINUED
0009 00
0009 00-2
FRONT
AND LEFT
SIDE
2
Before
Front Armor
a. Inspect louvered grille panels and
upper and lower brush guards for
damage or loose or missing armor
plates and mounting bolts.
Any panel or armor plate is damaged,
loose, or missing, or mounting bolts are
loose or missing.
b. Inspect headlight mounting hardware
for damage or loose or missing brack-
ets and mounting bolts.
c. Inspect windshield ballistic glass
mounting hardware for damage or
loose or missing brackets and mount-
ing bolts.
Any windshield ballistic glass mounting
hardware is damaged, loose, or missing,
or mounting bolts are loose or missing.
d. Inspect exterior surface of wind-
shield ballistic glass for pitting,
cracks, or scratches.
Pitting, cracks, or scratches exist in the
exterior layer of windshield ballistic
glass and penetrate through to the inner
layer.
e. If dirty, clean windshield ballistic
glass (WP 0010 00).
ITEM
NO.
INTERVAL
LOCATION
PROCEDURE
NOT FULLY MISSION
CAPABLE IF:
ITEM TO
CHECK/
SERVICE


Back to Top