TB-9-2320-279-13-P-3
TECHNICAL BULLETIN; TANKER ARMOR MODULE KIT
OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST AND INSTALLATION INSTRUCTIONS)
JANUARY 2007
TB-9-2320-279-13-P-3 - Page 9 of 396
TB 9-2320-279-13&P-3
iii
HOW TO USE THIS TECHNICAL BULLETIN
NOTE
NOTE
If at any time you are unsure how to use this technical bulletin or you cannot locate the
information you need, notify your supervisor.
INTRODUCTION
a.
This technical bulletin is designed to help you operate and maintain the HEMTT Tanker Armor Module Kit. It
also provides installation instructions for the armor kit and includes the Repair Parts and Special Tools List
(RPSTL).
b.
This technical bulletin is written in work package format:
1.
Chapters divide the technical bulletin into major categories of information (e.g.,
General Information,
Equipment Description and Data,
and
Theory of Operation; Operator Instruction; Operator Maintenance
Instructions; Field Maintenance Instructions;
and
Supporting Information
).
2.
Each chapter is divided into work packages, which are identified by a 4-digit number (e.g., 0001, 0002,
etc.) located on the upper right-hand corner of each page. The work package page number (e.g., 0001-1,
0001-2, etc.) is located center at the bottom of each page.
3.
If a Change Package is issued to this technical bulletin, added work packages use the 5th and 6th digits
of their number to indicate new material. For instance, work packages inserted between WP 0001 and
WP 0002 are numbered WP 0001 01, WP 0001 02, etc.
c.
Read through this technical bulletin to become familiar with its organization and contents before attempting to
operate or maintain the armor kit.
CONTENTS OF THIS TECHNICAL BULLETIN
a.
A
Warning Summary
is located at the beginning of this technical bulletin. Become familiar with these warnings
before operating or performing maintenance on the armor kit.
b.
A
Table of Contents
, located in the front of the technical bulletin, lists all chapters and work packages in the
publication.
1.
The Table of Contents also provides
Reporting Errors and Recommending Improvements
information
and DA Form 2028 addresses, for the submittal of corrections to this technical bulletin.
2.
If you cannot find what you are looking for in the Table of Contents, refer to the alphabetical
Index
at the
back of the technical bulletin.
c.
Chapter 1,
General Information
,
Equipment Description, and Theory of Operation,
provides general informa-
tion on the technical bulletin and the armor kit.
d.
Chapter 2,
Operator Instructions
, explains and illustrates all operator procedures for the armor kit:
Operation
Under Usual Conditions
and
Operation Under Unusual Conditions.
e.
Chapter 3,
Operator Maintenance Instructions
, includes
Operator Preventive Maintenance Checks and
Services (PMCS) Introduction and Operator Preventive Maintenance Checks and Services (PMCS).
Back to Top
