TB-9-2320-280-35-13

TECHNICAL BULLETIN

INSTALLATION INSTRUCTIONS FOR SINGLE CHANNEL GROUND AND AIRBORNE RADIO SYSTEM (SINCGARS) AN/VRC-88F, AN/VRC-89F, AN/VRC-90F, AN/VRC-91F, AN/VRC-92F

OCTOBER 2006

CHANGE 1

TB-9-2320-280-35-13 - Page 103 of 148

5-75

TB 9-2320-280-35-13

Figure 5-94.

6

NOTE

• Remove right rear side rail, if necessary.

(Refer to TM 9-2320-280-20.)

• Rear edge of upper mounting plate should be approximately

1.187 in. from front edge of EPLRS mounting plate.

24-3.

Locate screw (10) on right rear wheelhouse (7) and drill out rivet (9) from right rear

wheelwell (7). Enlarge hole to 0.281 in.

24-4.

Position support plate underneath wheelhouse (7) and drill two 0.281-in. diameter holes.

24-5.

Using upper antenna plate (6) as template, locate, mark, and drill thirteen 0.281-in. holes (8) and

three 0.408-in. holes (11) in left rear wheelhouse (7).

6. ANTENNA PLATE – A3104004-1 – QTY. 1

11

7

10

9

8

~

9.75