TB-9-2320-280-35-14
TECHNICAL BULLETIN
INSTALLATION INSTRUCTIONS FOR SINGLE CHANNEL GROUND AND AIRBORNE RADIO SYSTEM (SINCGARS) AN/VRC-88F, AN/VRC-89F, AN/VRC-90F, AN/VRC-91F, AN/VRC-92F
SEPTEMBER 2006
TB-9-2320-280-35-14 - Page 28 of 148
5-6
TB 9-2320-280-35-14
Figure 5-8.
A
A
1
2
8
2
3
4
5
6
Section V. ASSEMBLY OF CAB ENCLOSURE PANEL
5-1.
Install 12V terminal board (8) on cab enclosure panel (3) with two screws (1), lockwashers (2), and
nuts (7).
5-2.
Install 24V terminal board (6) on cab enclosure panel (3) with three screws (1), lockwashers (2), and
nuts (7).
5-3.
Enlarge two holes marked A in terminal board (4) to 0.196 in., and secure terminal board (4) to cab
enclosure panel (3) with two rivets (5).
Figure 5-7.
1. SCREW – MS35206-230 – QTY. 5
2. LOCKWASHER – MS35338-41 – QTY. 5
4. TERMINAL BOARD – 12480570 – QTY. 1
5. BLIND RIVET – 12339355-1 – QTY. 2
7. NUT – MS35649-63 – QTY. 5
1
2
7
8
7
2
3
4
5
6
A
A
7
7
Back to Top
