TB-9-2320-280-35-14
TECHNICAL BULLETIN
INSTALLATION INSTRUCTIONS FOR SINGLE CHANNEL GROUND AND AIRBORNE RADIO SYSTEM (SINCGARS) AN/VRC-88F, AN/VRC-89F, AN/VRC-90F, AN/VRC-91F, AN/VRC-92F
SEPTEMBER 2006
TB-9-2320-280-35-14 - Page 37 of 148
5-15
TB 9-2320-280-35-14
1. MOUNTING BASE, MT-6353/VRC – A3014053-1 – QTY. 1
Section IX. POWER AMPLIFIER INSTALLATION
NOTE
Perform this procedure only if SINCGARS model AN/VRC-92F is
to be installed.
9-1.
Remove paint from vicinity of four mounting areas (2) on MT-6353/VRC mounting base (1) and
apply anti-seize compound as required.
9-2.
Remove paint from vicinity of four mounting holes (4) on integrated rack (3) and apply anti-seize
compound as required.
Figure 5-21.
2
1
Figure 5-22.
4
~
3
Back to Top
