TB-9-2320-280-35-14
TECHNICAL BULLETIN
INSTALLATION INSTRUCTIONS FOR SINGLE CHANNEL GROUND AND AIRBORNE RADIO SYSTEM (SINCGARS) AN/VRC-88F, AN/VRC-89F, AN/VRC-90F, AN/VRC-91F, AN/VRC-92F
SEPTEMBER 2006
TB-9-2320-280-35-14 - Page 78 of 148
5-56
TB 9-2320-280-35-14
23-7.
Remove and discard four existing bolts from left and right B-pillars.
23-8.
Remove paint from vicinity of four holes (12) on left B-pillar mounting (13). Apply anti-seize
compound as required.
23-9.
Install left overhead rail (8) on left B-pillar mounting (13) with four capscrews (14) and
washers (15). Do not tighten capscrews (14).
14. CAPSCREW – B1821BH025C138N – QTY. 8
15. WASHER – 2436161 – QTY. 8
Figure 5-77.
Figure 5-76.
8
13
15
14
9
17
16
15
14
23-10.
Remove paint from vicinity of four holes (17) on right side of vehicle B-pillar (16). Apply anti-seize
compound as required.
23-11.
Install right overhead rail (9) on right B-pillar mounting (16) with four capscrews (14) and
washers (15). Do not tighten capscrews (14).
12
Back to Top
