TB-9-2320-280-35-15
TECHNICAL BULLETIN
INSTALLATION INSTRUCTIONS FOR RETRANSMISSION VEHICLE WITH AMTECH TOP FOR AN/VRC-92F, AN/UYK-128 (V)4, RT-1812, AN/VSQ-2 (V), AB-1386/U, DAGR, AN/PSN-11
SEPTEMBER 2006
TB-9-2320-280-35-15 - Page 149 of 168
5-125
TB 9-2320-280-35-15
Figure 5-140.
40-56.
Attach shrink tubing (117) and terminal lug (115) to NTDR positive power terminal (134). Secure to
terminal board stud (99) with existing nut (116).
40-57.
Attach shrink tubing (117) and terminal lug (115) to NTDR negative power terminal (124). Secure
to terminal board stud (108) with existing nut (116).
40-58.
Attach shrink tubing (117) and terminal lug (115) to EPLRS positive power terminal (133). Secure
to terminal board stud (100) with existing nut (116).
40-59.
Attach shrink tubing (117) and terminal lug (115) to EPLRS negative power terminal (123). Secure
to terminal board stud (109) with existing nut (116).
40-60.
Attach shrink tubing (117) and terminal lug (115) to lower SINCGARS positive power
terminal (132). Secure to terminal board stud (101) with existing nut (116).
40-61.
Attach shrink tubing (117) and terminal lug (115) to lower SINCGARS negative power
terminal (122). Secure to terminal board stud (110) with existing nut (116).
40-62.
Attach shrink tubing (117) and terminal lug (115) to front SINCGARS positive power
terminal (131). Secure to terminal board stud (102) with existing nut (116).
40-63.
Attach shrink tubing (117) and terminal lug (115) to front SINCGARS negative power
terminal (121). Secure to terminal board stud (111) with existing nut (116).
40-64.
Attach shrink tubing (117) and terminal lug (115) to DAGR positive power terminal (130). Secure
to terminal board stud (103) with existing nut (116).
40-65.
Attach shrink tubing (117) and terminal lug (115) to DAGR negative power terminal (120). Secure
to terminal board stud (112) with existing nut (116).
40-66.
Attach shrink tubing (117) and terminal lug (115) to white control cable positive terminal (128).
Secure to terminal board stud (105) with existing nut (116).
40-67.
Attach shrink tubing (117) and terminal lug (115) to black control cable negative terminal (118).
Secure to terminal board stud (114) with existing nut (116).
40-68.
Attach shrink tubing (117) and terminal lug (115) to upper SINCGARS positive power
terminal (127). Secure to terminal board stud (106) with existing nut (116).
40-69.
Attach shrink tubing (117) and terminal lug (115) to upper SINCGARS negative power
terminal (125). Secure to terminal board stud (108) with existing nut (116).
40-70.
Attach shrink tubing (117) and terminal lug (115) to solenoid to positive power terminal (129).
Secure to terminal board stud (104) with existing nut (116).
40-71.
Attach shrink tubing (117) and terminal lug (115) to shunt to negative terminal (126). Secure to
terminal board stud (107) with existing nut (116).
40-72.
Attach shrink tubing (117) and terminal lug (115) to solenoid to negative terminal (119). Secure to
terminal board stud (113) with existing nut (116).
119
120
121
123
125
126
127
128
129
130
131
132
133
122
116
117
115
118
100
101
102
103
104
105
106
107
108 109
110
111
112
113
114
117. SHRINK TUBING – MS23053/4-302-0 – QTY. A/R
124
99
134
Back to Top
