TB-9-2320-280-35-15
TECHNICAL BULLETIN
INSTALLATION INSTRUCTIONS FOR RETRANSMISSION VEHICLE WITH AMTECH TOP FOR AN/VRC-92F, AN/UYK-128 (V)4, RT-1812, AN/VSQ-2 (V), AB-1386/U, DAGR, AN/PSN-11
SEPTEMBER 2006
TB-9-2320-280-35-15 - Page 51 of 168
TB 9-2320-280-35-15
5-27
Figure 5-35.
Section XVI. CHARGE CONTROL BOX INSTALLATION
16-1.
Locate, mark, and drill one 0.391-in. diameter hole (6) in multi-net rack (7).
16-2.
Using charge control box (4) as template, locate, mark, and drill three 0.391-in. diameter holes (8)
in multi-net rack (7).
16-3.
Install four inserts (5) in multi-net rack (7).
16-4.
Install charge control box (4) on multi-net rack (7) with four screws (1), washers (2), and
lockwashers (3).
1. SCREW – B1821BH025C100N – QTY. 4
2. WASHER – 2436161 – QTY. 4
3. LOCKWASHER – 120380 – QTY. 4
4. CHARGE CONTROL BOX – PKMM-000-002 – QTY. 1
5. INSERT – 12446871-2 – QTY. 4
1
2
3
4
5
6
7
~
8
10.81
1.00
Back to Top
