TB-9-2320-280-35-15
TECHNICAL BULLETIN
INSTALLATION INSTRUCTIONS FOR RETRANSMISSION VEHICLE WITH AMTECH TOP FOR AN/VRC-92F, AN/UYK-128 (V)4, RT-1812, AN/VSQ-2 (V), AB-1386/U, DAGR, AN/PSN-11
SEPTEMBER 2006
TB-9-2320-280-35-15 - Page 52 of 168
TB 9-2320-280-35-15
5-28
1
2
Section XVII. LOWER REAR SINCGARS MOUNT INSTALLATION
17-1.
Locate, mark, and drill one 0.343-in. diameter hole (2) in lower shelf of multi-net rack (1).
~
Figure 5-36.
17-2.
Using SINCGARS mounting base MT-6352/VRC as template, locate, mark, and drill four 0.343-in.
diameter holes (3) in lower shelf of multi-net rack (1).
17-3.
Remove paint from vicinity of holes (3) and apply anti-seize compound as required.
3
Figure 5-37.
1.50
3.00
~
1
Back to Top
