TB-9-2320-280-35-15
TECHNICAL BULLETIN
INSTALLATION INSTRUCTIONS FOR RETRANSMISSION VEHICLE WITH AMTECH TOP FOR AN/VRC-92F, AN/UYK-128 (V)4, RT-1812, AN/VSQ-2 (V), AB-1386/U, DAGR, AN/PSN-11
SEPTEMBER 2006
TB-9-2320-280-35-15 - Page 47 of 168
TB 9-2320-280-35-15
5-23
Figure 5-31.
NOTE
• Use existing holes of D-rings to mount frame and shelf. Older
model trucks have existing strux nuts. If installing multi-net rack
on a newer model vehicle, use locknuts.
• Any missing strux nuts must be replaced by locknuts.
15-3.
Install lower shelf (4) on frame (9) with two screws (22), four washers (19), two lockwashers (18),
and nuts (17).
15-4.
Install lower shelf (4) and frame (9) on cargo bed (15) with two capscrews (21), lockwashers (20),
spacers (16), and locknuts (14) if necessary.
15-5.
Secure lower shelf (4) on frame (9) and cargo bed (15) with two capscrews (7), lockwashers (8), and
locknuts (14) if necessary.
15-6.
Secure frame (9) on cargo bed (15) with three capscrews (10), lockwashers (11), washers (12),
spacers (13), and locknuts (14) if necessary.
7
8
4
9
16
17
18
19
10
11
12
13
14
15
20
21
19
22
~
7. CAPSCREW – B1821BH038F100N – QTY. 2
8. LOCKWASHER
– MS45904-76 – QTY. 2
9. FRAME – A3210675-1 – QTY. 1
10. CAPSCREW – B1821BH050C400N – QTY. 3
11. LOCKWASHER – MS45904-84 – QTY. 5
12. WASHER, FLAT – 2436165 – QTY. 3
13. SPACER — PART OF ITEM 9 — QTY. 3
16. SPACER — PART OF ITEM 9 — QTY. 2
17. NUT — 9419143 – QTY. 2
18. LOCKWASHER – MS35338-44 – QTY. 2
19. WASHER – 2436161 – QTY. 4
20. WASHER, FLAT – 2436165 – QTY. 2
21. CAPSCREW – B1821BH050C450N – QTY. 2
22. SCREW – B1821BH025C150N – QTY. 2
Back to Top
