TB-9-2320-302-13-P-1
CREW PROTECTION KIT PART 1 OF 3
TECHNICAL BULLETIN; OPERATOR’S, UNIT AND DIRECT SUPPORT, MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LISTS
NOVEMBER 2006
TB-9-2320-302-13-P-1 - Page 15 of 380
TB 9-2320-302-13&P-1
v/vi Blank
Change 1
WARNING
A WARNING indicates a hazard which may cause injury or death to
personnel
.
CAUTION
A CAUTION is a reminder of safety practices or directs attention to usage practices that may cause
damage to equipment.
NOTE
A NOTE is a statement containing information that will make the procedures easier to perform.
3.
Statements and words of particular interest may be printed in CAPITAL LETTERS to create emphasis.
4.
Within a procedural step, reference may be made to another work package in this bulletin or to another manual.
These references indicate where you should look for more complete information.
a.
If you are told: “Refer to
Crew Protection Kit Installation Instructions
(WP 0036 00)”, go to WP 0036 00 in
this bulletin for instructions on this procedure.
b.
If you are told: “For complete information on M915A3P1 Operator PMCS, refer to TM 9-2320-302-10”, go
to
References
in WP 0031 00 for complete information on the cited reference.
5.
Illustrations are placed after, and as close to, the procedural steps to which they apply. Callouts placed on the art
are text or numbers.
6.
Numbers
located at lower right corner of art (e.g. 417-001;
417-002,
etc.) are
art control numbers and are
used for tracking purposes only.
7.
Technical instructions include metric units as well as standard units. For your reference, a
Metric Conversion
Chart
is located on the inside back cover of the bulletin.
Back to Top
