TB-9-2320-302-13-P-1

CREW PROTECTION KIT PART 1 OF 3

TECHNICAL BULLETIN; OPERATOR’S, UNIT AND DIRECT SUPPORT, MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LISTS

NOVEMBER 2006
TB-9-2320-302-13-P-1

  TB-9-2320-302-13-P-1 - Page 14 of 380

TB 9-2320-302-13&P-1
Change 1
iv
HOW TO USE THIS TECHNICAL BULLETIN
NOTE
If at any time you are unsure how to use this bulletin or you cannot locate the information you
need, notify your supervisor.
INTRODUCTION
1.
This bulletin
is designed to help you
operate and maintain the M915A3P1, M915A2P1,
M916A3P1,
M917A2P1, M915A4P1, M917A1P1, M916A1P1, and M916A2P1 Crew Protection Kit. It also provides installation
instructions for the Crew Protection Kit (CPK) and the Repair Parts and Special Tools Lists (RPSTL).
2.
This bulletin is written in work package format:
a.
Chapters divide the
manual into
major categories of information
(e.g.,
General Information,
Equipment Description, and Theory of Operation
;
Operator Instructions
;
Operator Maintenance
Instructions
;
Unit Maintenance Instructions
; and
Supporting Information
).
b.
Each Chapter is divided into work packages, which are identified by a 6-digit number (e.g. 0001 00, 0002 00,
etc.) located on the upper right-hand corner of each page. The work package page number (e.g. 0001 00-1,
0001 00-2, etc.) is located centered at the bottom of each page.
c.
If a Change Package is issued to this bulletin, added work packages use the 5th
and 6th
digits of their
number to indicate new material. For instance, work packages inserted between WP 0001 00 and WP 0002
00 are numbered WP 0001 01, WP 0001 02, etc.
3.
Read through this
bulletin to become familiar
with its
organization and contents
before attempting to operate
or maintain the armor kit.
CONTENTS OF THIS BULLETIN
1.
A
Warning Summary
is located at the beginning of this bulletin. Become familiar with these warnings before
operating or performing maintenance on the armor kit.
2.
A
Table of Contents
, located in the front of the bulletin, lists all chapters and work packages in the publication.
a.
The Table of Contents also provides
Reporting Errors and Recommending Improvements
information
and DA Form 2028 addresses, for the submittal of corrections to this bulletin.
b.
If you cannot find what you are looking for in the Table of Contents, refer to the alphabetical
Index
at the
back of the bulletin.
3.
Chapter 1,
General Information,
Equipment Description and Data,
and
Theory
of Operation
, provides
general information on the bulletin and the armor kit.
4.
Chapter 2,
Operator Instructions
, explains and illustrates all operator procedures for the armor kit:
Operation
Under
Usual Conditions
and
Operation Under Unusual Conditions
.
5.
Chapter 3, deals with
Operator
Maintenance Instructions
. This chapter includes
Operator Preventive
Maintenance
Checks and Services (PMCS) Introduction
and
Operator Preventive Maintenance Checks and
Services (PMCS)
.
6.
Chapter 4, includes all maintenance tasks related to
Unit Maintenance Instructions
.
7.
Chapter 5, includes
Supporting Information: References
;
Maintenance Allocation Chart (MAC)
Introduction
;
Maintenance Allocation Chart
(MAC)
;
Expendable and
Durable Items List
;
Tool Identification
List
;
Torque Limits
;
Crew Protection Kit Installation Instructions
;
Repair Parts and Special Tools Lists
(RPSTL) Introduction
; and
Repair Parts and Special Tools Lists (RPSTL)
.


Back to Top