TB-9-2320-302-13-P-1

TB 9-2320-302-13&P-1

NOTE

For information on first aid, refer to FM 4-25.11.

WARNING

ADHESIVES AND SEALANTS

Use caution when using adhesives and sealants. Prolonged inhalation of vapors can cause lung irritation.

Contact with skin can cause dermatitis. Wear gloves and safety goggles and use product in a well-ventilated

area away from open flame. If ingested, keep individual calm and seek medical attention. DO NOT induce

vomiting. If contact with skin or eyes is made, flush thoroughly with water. Dispose of cleanup rags IAW

local policy and ordinances. Failure to follow this warning may cause injury to personnel.

WARNING

COMPRESSED AIR

Particles blown by compressed air are hazardous. DO NOT exceed 15 psi (103 kPa) nozzle pressure when

drying parts with compressed air. Use a maximum of 30 psi (207 kPa) when cleaning components. DO NOT

direct compressed air against human skin. Failure to follow this warning may result in injury or death to per-

sonnel. Make sure air stream is directed away from user and other personnel in the area. To prevent injury,

user must wear protective goggles or face shield.

WARNING

DRILLING AND RIVETING

Eye protection is required when drilling and when using riveter to install rivets. Failure to follow this warn-

ing may cause injury to personnel.

WARNING

HEAVY COMPONENTS

Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-

dure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of

heavy parts supported only by lifting device. Failure to follow this warning may cause injury or death to per-

sonnel.

WARNING

Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-

dure. Failure to follow this warning may cause injury or death to personnel.

TB-9-2320-302-13-P-1 - Page 4 of 380