TB-9-2320-302-13-P-2
CREW PROTECTION KIT PART 2 OF 3
TECHNICAL BULLETIN; OPERATOR'S, UNIT AND DIRECT SUPPORT, MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS AND REPAIR PARTS AND SPECIAL TOOLS LIST
JUNE 2007
TB-9-2320-302-13-P-2 - Page 171 of 396
TB 9-2320-302-13&P-2
0030 00-1
WINDSHIELD BALLISTIC GLASS REPLACEMENT
0030 00
THIS WORK PACKAGE COVERS
Removal, Cleaning and Inspection, Installation
INITIAL SETUP
Maintenance Level
Unit
Tools and Special Tools
Tool Kit, General Mechanic’s (Item 9, WP 0035 00)
Materials/Parts
Rag, Wiping (Item 9, WP 0036 00)
Sealing Compound, Urethane (Item 10, WP 0036
00)
Locknut (4)
Lockwasher (34)
Personnel Required
Two
References
WP 0011 00
Equipment Conditions
(M915A3P1, M916A3P1, and M917A2P1)
Vehicle parked on level ground (TM 9-2320-302-
10)
Parking/Emergency Brake applied (TM 9-2320-
302-10)
Engine OFF (TM 9-2320-302-10)
Equipment Conditions - Continued
(M915A3P1, M916A3P1, and M917A2P1) -
Continued
Battery Disconnect Switch in OFF position (TM 9-
2320-302-10)
(M915A4P1)
Vehicle parked on level ground (TM 9-2320-303-
10)
Parking/Emergency Brake applied (TM 9-2320-
303-10)
Engine OFF (TM 9-2320-303-10)
Battery Disconnect Switch in OFF position (TM 9-
2320-303-10)
(M915A2P1, M916A1P1, M916A2P1, and
M917A1P1)
Vehicle parked on level ground (TM 9-2320-363-
10)
Parking/Emergency Brake applied (TM 9-2320-
363-10)
Engine OFF (TM 9-2320-363-10)
If equipped, Battery Disconnect Switch in OFF
position (TM 9-2320-363-10), otherwise, discon-
nect battery cables (TM 9-2320-363-20-2)
CAUTION
Never use impact tools when removing or installing ballistic glass. Failure to follow this caution may dam-
age ballistic glass.
Back to Top
