TB-9-2320-302-13-P-2

CREW PROTECTION KIT PART 2 OF 3

TECHNICAL BULLETIN; OPERATOR'S, UNIT AND DIRECT SUPPORT, MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS AND REPAIR PARTS AND SPECIAL TOOLS LIST

JUNE 2007

TB-9-2320-302-13-P-2 - Page 167 of 396

TB 9-2320-302-13&P-2

CENTER FIREWALL ARMOR REPLACEMENT - CONTINUED

0029 00

0029 00-3

REMOVAL - CONTINUED

3.

Remove two locknuts (17), washers (18), bolts (20), and washers (19) from center firewall armor (8). Discard locknuts.

WARNING

Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-

dure. Failure to follow this warning may cause injury or death to personnel.

4.

With assistance, remove two bolts (14), washers (16), lockwashers (15), and center firewall armor (8) from vehicle. Dis-

card lockwashers.

5.

Remove two locknuts (9), washers (10), bolts (12), washers (11), and bracket (13) from vehicle. Discard locknuts.

CLEANING AND INSPECTION

Clean and inspect all parts IAW

General Maintenance Instructions

(WP 0011 00).

440-043

17,18,19,20

9,10,11,12

13

14,15,16

8