TB-9-2320-302-13-P-2

CREW PROTECTION KIT PART 2 OF 3

TECHNICAL BULLETIN; OPERATOR'S, UNIT AND DIRECT SUPPORT, MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS AND REPAIR PARTS AND SPECIAL TOOLS LIST

JUNE 2007

TB-9-2320-302-13-P-2 - Page 157 of 396

TB 9-2320-302-13&P-2

LEFT FIREWALL ARMOR REPLACEMENT - CONTINUED

0027 00

0027 00-3/(0027 00-4 Blank)

REMOVAL - CONTINUED

4.

Remove locknut (14), washer (15), bolt (17), washer

(16), and bracket (13) from radiator core support (18).

Discard locknuts.

CLEANING AND INSPECTION

Clean and inspect all parts IAW

General Maintenance Instructions

(WP 0011 00).

INSTALLATION

1.

Install bracket (13), washer (16), bolt (17), washer (15), and new locknut (14) on radiator core support (18).

WARNING

•

Use extreme caution when handling heavy parts. Provide adequate support and use assistance during

procedure. Failure to follow this warning may cause injury or death to personnel.

•

For proper threat protection, armor must be installed correctly into the armor frame. During installation,

ensure that the surface marked “STRIKE FACE” is facing outward towards the threat. Exposing the

passive side of the ballistic panel outward makes the armor less effective. Failure to follow this warning

may cause injury or death to personnel.

2.

With assistance, install left firewall armor (1), two washers (11), bolts (12), washers (10), and new locknuts (9) on

bracket (13).

3.

Install two new lockwashers (7), washers (8), and bolts (6) on left firewall armor (1).

4.

Install two washers (4), bolts (5), washers (3), and new locknuts (2) on left firewall armor (1).

5.

Install left wheel well blast deflector extension (WP 0025 00).

END OF WORK PACKAGE

440-094

13

14,15,16,17

18