TB-9-2320-302-13-P-2

CREW PROTECTION KIT PART 2 OF 3

TECHNICAL BULLETIN; OPERATOR'S, UNIT AND DIRECT SUPPORT, MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS AND REPAIR PARTS AND SPECIAL TOOLS LIST

JUNE 2007

TB-9-2320-302-13-P-2 - Page 148 of 396

TB 9-2320-302-13&P-2

RIGHT WHEEL WELL BLAST DEFLECTOR REPLACEMENT - CONTINUED

0026 00

0026 00-2

REMOVAL

WARNING

Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-

dure. Failure to follow this warning may cause injury or death to personnel.

NOTE

Note orientation of bolts on wheel well blast protection extension panel to aid installation.

1.

With assistance, remove five locknuts (10), washers (11), bolts (13), washers (12), washer plate (9), and wheel well blast

deflector extension (8) from forward mounting plate (17). Discard locknuts.

2.

Remove two locknuts (18), washers (19), bolts (21), washers (20), bracket (7), and hood latch (6) from bracket (5). Dis-

card locknuts.

3.

Remove four locknuts (1), washers (2), bolts (4), washers (3), and bracket (5) from right firewall armor. Discard lock-

nuts.

4.

Remove two bolts (14), washers (16), lockwashers (15), and forward mounting plate (17) from right firewall armor. Dis-

card lockwashers.