TB-9-2320-302-13-P-2

CREW PROTECTION KIT PART 2 OF 3

TECHNICAL BULLETIN; OPERATOR'S, UNIT AND DIRECT SUPPORT, MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS AND REPAIR PARTS AND SPECIAL TOOLS LIST

JUNE 2007

TB-9-2320-302-13-P-2 - Page 143 of 396

TB 9-2320-302-13&P-2

LEFT WHEEL WELL BLAST DEFLECTOR REPLACEMENT - CONTINUED

0025 00

0025 00-5

CLEANING AND INSPECTION

Clean and inspect all parts IAW

General Maintenance Instructions

(WP 0011 00).

INSTALLATION

1.

Install two cross members (50), two wheel well frames (59), bracket (49), four washers (53), bolts (54), washers (52),

and new locknuts (51) on wheel well support bar (61).

2.

Install bracket (60), two washers (57), bolts (58), washers (56), and new locknuts (55) on wheel well frame (59).

WARNING

Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-

dure. Failure to follow this warning may cause injury or death to personnel.

3.

With assistance, install wheel well blast deflector (40), five washers (47), bolts (48), washers (46), and new locknuts

(45) on wheel well frames (59).

4.

Install bracket (62), two washers (43), bolts (44), washers (42), and new locknuts (41) on wheel well blast deflector (40).

440-035

60

61

62

41,42,43,44

40

45,46,47,48

49

50

51,52,53,54

55,56,57,58

59