TB-9-2320-302-13-P-2
CREW PROTECTION KIT PART 2 OF 3
TECHNICAL BULLETIN; OPERATOR'S, UNIT AND DIRECT SUPPORT, MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS AND REPAIR PARTS AND SPECIAL TOOLS LIST
JUNE 2007
TB-9-2320-302-13-P-2 - Page 136 of 396
TM 9-2320-302-13&P-2
A-PILLAR ARMOR REPLACEMENT - CONTINUED
0024 00
0024 00-2
REMOVAL
1.
Remove two locknuts (5), washers (6), bolts (8), and washers (7) from A-pillar armor (4). Discard locknuts.
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during procedure.
Failure to follow this warning may cause injury to personnel.
2.
With assistance, remove three bolts (1), lockwashers
(2), washers (3), and A-pillar armor (4) from vehicle
cab. Discard lockwashers.
CLEANING AND INSPECTION
Clean and inspect all parts IAW
General Maintenance Instructions
(WP 0011 00).
440-031
4
1,2,3
5,6,7,8
Back to Top
