TB-9-2320-302-13-P-2

CREW PROTECTION KIT PART 2 OF 3

TECHNICAL BULLETIN; OPERATOR'S, UNIT AND DIRECT SUPPORT, MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS AND REPAIR PARTS AND SPECIAL TOOLS LIST

JUNE 2007

TB-9-2320-302-13-P-2 - Page 144 of 396

TB 9-2320-302-13&P-2

LEFT WHEEL WELL BLAST DEFLECTOR REPLACEMENT - CONTINUED

0025 00

0025 00-6

INSTALLATION - CONTINUED

5.

If equipped, install washer fluid box (38), four wash-

ers (35), bolts (36), washers (34), new locknuts (33),

connector (39), and hose (37) on wheel well blast

deflector (40).

6.

Install forward mounting plate (18), two new lockwashers (21), washers (22), and bolts (20) on left firewall armor.

7.

Install bracket (28), stud plate (5), drive shaft plate (6), nut plate (32), two new lockwashers (30), washers (31), and

bolts (29) on left firewall armor.

8.

Install bracket (11), four washers (9), bolts (10), washers (8), and new locknuts (7) on left firewall armor.

9.

Install hood latch (12), bracket (17), two washers (15), bolts (16), washers (14), and new locknuts (13) on bracket (11).

WARNING

Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-

dure. Failure to follow this warning may cause injury or death to personnel.

440-034

39

38

37

33,34,35,36

40