TB-9-2320-302-13-P-2
CREW PROTECTION KIT PART 2 OF 3
TECHNICAL BULLETIN; OPERATOR'S, UNIT AND DIRECT SUPPORT, MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS AND REPAIR PARTS AND SPECIAL TOOLS LIST
JUNE 2007
TB-9-2320-302-13-P-2 - Page 150 of 396
TB 9-2320-302-13&P-2
RIGHT WHEEL WELL BLAST DEFLECTOR REPLACEMENT - CONTINUED
0026 00
0026 00-4
REMOVAL - CONTINUED
5.
Remove two locknuts (29), washers (30), bolts (32), washers (31), and bracket (33) from wheel well blast deflector (28).
Discard locknuts.
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Failure to follow this warning may cause injury or death to personnel.
6.
With assistance, remove five locknuts (23), washers (24), bolts (26), washers (25), and wheel well blast deflector (28)
from wheel well frames (27). Discard locknuts.
7.
Remove two locknuts (35), washers (36), bolts (38), washers (37), and bracket (34) from wheel well frame (27). Discard
locknuts.
8.
Remove four locknuts (39), washers (40), bolts (42), washers (41), bracket (22), two wheel well frames (27), and two
cross members (44) from wheel well support bar (43). Discard locknuts.
CLEANING AND INSPECTION
Clean and inspect all parts IAW
General Maintenance Instructions
(WP 0011 00).
440-037
34
33
29,30,31,32
28
27
23,24,25,26
22
43
44
39,40,41,42
35,36,37,38
Back to Top
