TB-9-2320-302-13-P-2

CREW PROTECTION KIT PART 2 OF 3

TECHNICAL BULLETIN; OPERATOR'S, UNIT AND DIRECT SUPPORT, MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS AND REPAIR PARTS AND SPECIAL TOOLS LIST

JUNE 2007

TB-9-2320-302-13-P-2 - Page 142 of 396

TB 9-2320-302-13&P-2

LEFT WHEEL WELL BLAST DEFLECTOR REPLACEMENT - CONTINUED

0025 00

0025 00-4

REMOVAL - CONTINUED

7.

If equipped, remove hose (37), connector (39), four

locknuts (33), washers (34), bolts (36), washers (35),

and washer fluid box (38) from wheel well blast

deflector (40). Discard locknuts.

8.

Remove two locknuts (41), washers (42), bolts (44), washers (43), and bracket (62) from wheel well blast deflector (40).

Discard locknuts.

WARNING

Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-

dure. Failure to follow this warning may cause injury or death to personnel.

9.

With assistance, remove five locknuts (45), washers (46), bolts (48), washers (47), and wheel well blast deflector (40)

from wheel well frames (59). Discard locknuts.

10.

Remove two locknuts (55), washers (56), bolts (58), washers (57), and bracket (60) from wheel well frame (59). Discard

locknuts.

11.

Remove four locknuts (51), washers (52), bolts (54), washers (53), bracket (49), two wheel well frames (59), and two

cross members (50) from wheel well support bar (61). Discard locknuts.

440-034

39

38

37

33,34,35,36

40