TB-9-2320-302-13-P-2

CREW PROTECTION KIT PART 2 OF 3

TECHNICAL BULLETIN; OPERATOR'S, UNIT AND DIRECT SUPPORT, MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS AND REPAIR PARTS AND SPECIAL TOOLS LIST

JUNE 2007

TB-9-2320-302-13-P-2 - Page 299 of 396

TSB 006 - REAR CAB GRAB HANDLE ADAPTER PLATE

20 Dec 2005

Adapter Plates are provided to allow re-installation of the OEM Grab Rails on the

back of the cab.

REQUIRED TOOLS:

1/2” Socket and Ratchet Driver

4 Armor Brackets- P/N 110-170055-001

PROCEDURE:

1. Install the Adapter Plates to the top and bottom studs on the Rear Armor Frame as

shown.

2.

Install the OEM Grab Rail with 5/16” flat washers and lock washers and hex nuts.

0039 00-5