TB-9-2320-302-13-P-2

CREW PROTECTION KIT PART 2 OF 3

TECHNICAL BULLETIN; OPERATOR'S, UNIT AND DIRECT SUPPORT, MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS AND REPAIR PARTS AND SPECIAL TOOLS LIST

JUNE 2007

TB-9-2320-302-13-P-2 - Page 300 of 396

TSB 007 - CENTERLINE FIREWALL PROTECTION (Air filter)

AND QUICK RELEASE SYSTEM FOR AIR FILTER

20 Dec 2005

REQUIRED TOOLS:

3/8” Ratchet Driver

9/16” Socket and Wrench

3/8” Drill Bit and Drill

PROCEDURE:

1. Remove air filter housing.

2. Remove dryer mounting bracket bolts.

3. Remove passenger windshield wiper

pivot bracket, bolts and nuts.

*

Use caution when removing bolts to

ensure that the studs do not fall into the

engine compartment

.

4. Use hat bracket to mark mounting hole

location (place bracket on back of

housing and slide until bend is met as

shown with in the picture).

.

WARNING:

DISCONNECT ALL OUTLETS TO POWER BEFORE BEGINNING

PROCEDURE.

0039 00-6