TB 9-2320-302-13&P-2
0012 00-1
DOOR AND FRAME ASSEMBLY REPLACEMENT
0012 00
THIS WORK PACKAGE COVERS
Removal, Cleaning and Inspection, Installation
INITIAL SETUP
Maintenance Level
Unit
Tools and Special Tools
Tool Kit, General Mechanic’s (Item 9, WP 0035 00)
Shop Equipment, Common No. 1 (Item 6, WP 0035
00)
Link, Bearing (Lifting) (Item 5, WP 0035 00)
Sling, Nylon (Item 8, WP 0035 00)
Lifting Device (500-lb Minimum Capacity)
Materials/Parts
Rag, Wiping (Item 9, WP 0036 00)
Locknut (20)
Lockwasher (6)
Personnel Required
Two
References
WP 0011 00
Equipment Conditions
(M915A3P1, M916A3P1, and M917A2P1)
Vehicle parked on level ground (TM 9-2320-302-
10)
Parking/Emergency Brake applied (TM 9-2320-
302-10)
Engine off (TM 9-2320-302-10)
Equipment Conditions - Continued
(M915A3P1, M916A3P1, and M917A2P1) -
Continued
Battery Disconnect Switch in OFF position (TM 9-
2320-302-10)
Outside Door Mirror removed (TM 9-2320-302-20-
2)
(M915A4P1)
Vehicle parked on level ground (TM 9-2320-303-
10)
Parking/Emergency Brake applied (TM 9-2320-
303-10)
Engine OFF (TM 9-2320-303-10)
Battery Disconnect Switch in OFF position (TM 9-
2320-303-10)
Outside Door Mirror removed (TM 9-2320-303-24-
1)
(M915A2P1, M916A1P1, M916A2P1, and
M917A1P1)
Vehicle parked on level ground (TM 9-2320-363-
10)
Parking/Emergency Brake applied (TM 9-2320-
363-10)
Engine OFF (TM 9-2320-363-10)
If equipped, Battery Disconnect Switch in OFF
position (TM 9-2320-363-10), otherwise, discon-
nect Battery Cables (TM 9-2320-363-20-2)
Outside Door Mirror removed (TM 9-2320-363-20-
2)
NOTE
The following procedure is for right door assembly. Use same procedure for left door assembly.