TB-9-2320-302-13-P-2
CREW PROTECTION KIT PART 2 OF 3
TECHNICAL BULLETIN; OPERATOR'S, UNIT AND DIRECT SUPPORT, MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS AND REPAIR PARTS AND SPECIAL TOOLS LIST
JUNE 2007
TB-9-2320-302-13-P-2 - Page 74 of 396
TB 9-2320-302-13&P-2
DOOR AND FRAME ASSEMBLY REPLACEMENT - CONTINUED
0012 00
0012 00-4
CLEANING AND INSPECTION
Clean and inspect all parts IAW
General Maintenance Instructions
(WP 0011 00).
INSTALLATION
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Failure to follow this warning may cause injury or death to personnel.
1.
Install door frame assembly (5) to vehicle door frame
with four washers (27), bolts (28), washers (26), and
new locknuts (25).
2.
Install two angle alignment guides (24), four washers
(22), bolts (23), washers (21), and new locknuts (20)
on door frame assembly (5).
3.
Install two cam engagement angles (19), four washers
(17), bolts (18), washers (16), and new locknuts (15)
on door frame assembly (5).
4.
Install six washers (8), bolts (9), washers (7), and new locknuts (6) on door frame assembly (5).
5.
Install six new lockwashers (14), washers (13), and bolts (12) on door frame assembly (5).
6.
Install two washers (3), bolts (4), washers (2), and new locknuts (1) on door frame assembly (5).
440-013
25,26,27,28
24
20,21,22,23
15,16,17,18
5
19
Back to Top
