TB-9-2320-302-13-P-3

CREW PROTECTION KIT; AIR CONDITIONING KIT PART 3 OF 3

TECHNICAL BULLETIN; OPERATOR’S, UNIT, AND DIRECT SUPPORT, MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LIST

MARCH 2008

TB-9-2320-302-13-P-3 - Page 104 of 240

TB 9-2320-302-13&P-3

COMPRESSOR REPLACEMENT - CONTINUED

0016 00

0016 00-4

REMOVAL - CONTINUED

5.

Loosen two locknuts (11) and bolts (10) on compressor (1).

6.

Loosen two locknuts (14), washers (13), and bolts (12) on compressor (1).

7.

Slide compressor (1) down on compressor mounting bracket (15) to loosen drive belt (17).

NOTE

Record which groove drive belt is mounted in on compressor to aid installation.

8.

Remove drive belt (17) from compressor (1).

NOTE

Compressor mounting bolts are metric.

9.

Remove two locknuts (11) and bolts (10) from compressor (1). Discard locknuts.

10.

Remove two locknuts (14), washers (13), bolts (12), and adjusting plate (16) from compressor (1). Discard locknuts.

11.

Remove compressor (1) from compressor mounting bracket (15).

449-065

10,11

1

12,13,14

15

16

17