TB-9-2320-302-13-P-3

CREW PROTECTION KIT; AIR CONDITIONING KIT PART 3 OF 3

TECHNICAL BULLETIN; OPERATOR’S, UNIT, AND DIRECT SUPPORT, MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LIST

MARCH 2008
TB-9-2320-302-13-P-3

  TB-9-2320-302-13-P-3 - Page 105 of 240

TB 9-2320-302-13&P-3
COMPRESSOR REPLACEMENT - CONTINUED
0016 00
0016 00-5
REMOVAL - CONTINUED
12.
Remove two locknuts (18) and bolts (19) from compressor mounting bracket (15). Discard locknuts.
13.
Remove compressor mounting bracket (15) from vehicle.
CLEANING AND INSPECTION
Clean and inspect all parts IAW
General Maintenance Instructions
(WP 0014 00).
INSTALLATION
1.
Install compressor mounting bracket (15), two bolts (19), and new locknuts (18) on vehicle. Tighten to 35 lb-ft (47.5
Nm).
449-066
15
18
19
19
18


Back to Top