TB-9-2320-302-13-P-3

CREW PROTECTION KIT; AIR CONDITIONING KIT PART 3 OF 3

TECHNICAL BULLETIN; OPERATOR’S, UNIT, AND DIRECT SUPPORT, MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LIST

MARCH 2008

  TB-9-2320-302-13-P-3 - Page 206 of 240

The RFI Filter will not mount to
the existing holes in the AW
CPK.
Disassemble the RFI Filter
from the bracket and attach the
RFI to the armor channeling to
the right of the evaporator with
self tapping screws.
Install dust
cover over RFI Filter using the
same self tapping screws.
You
will need to drill four small pilot
holes through the channeling.
ENSURE YOU DO NOT
DRILL INTO ARMOR
PANELING
.
(disregard the rear
evaporator bracket in the bottom
two photo’s; it is not the correct
bracket although has no bearing
on this instruction)
Page 24


Back to Top