TB-9-2320-302-13-P-3
CREW PROTECTION KIT; AIR CONDITIONING KIT PART 3 OF 3
TECHNICAL BULLETIN; OPERATOR’S, UNIT, AND DIRECT SUPPORT, MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LIST
MARCH 2008
TB-9-2320-302-13-P-3 - Page 199 of 240
M915/A2 Air Conditioner
Compressor Mounting Kit
RED DOT#: RD-9-10060-0
RD-9-10061-0
INSTALLATION INSTRUCTIONS
M915/A2 with DETROIT 60 SERIES
PARTS LIST
Compressor mounting bracket
1 Bolt M10x1.5x40mm
2 Nut, M10x 1.5 nylon lock
5
Belt, 17560
1 Bolt M10x1.5x35mm
2 Washer, M10
2
Compressor Adjusting Plate
1 Bolt M10x1.5x130mm
2 Installation Instructions
1
TOOLS REQUIRED
±
3/8” drive ratchet or air ratchet
±
Metric hex wrench set
±
Metric socket set
±
Torque wrench 0-50 ft-lbs
±
½” Breaker bar
±
Belt tension gauge
±
Wire brush and scraper
Before starting installation review parts list above to verify that all required parts
needed for installation were received.
MACHINE PREPARATION
1. Set parking brake and disconnect battery or use other means to prevent accidental
engine starting.
2. Remove fan drive belts (3) from around engine crank drive.
RD-9-10061 (REV-)
Page 17
16-RD-023.doc
Back to Top
