TB-9-2320-335-13-P
TRUCK, UTILITY: EXPANDED CAPACITY, IAP/ARMOR READY
TECHNICAL BULLETIN; OPERATOR AND FIELD MAINTENANCE AND REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL) INSTRUCTIONS
MAY 2008
TB-9-2320-335-13-P - Page 194 of 680
TB 9-2320-335-13&P
7-14
7-7.1. BRAKE LINES REPLACEMENT (SERIAL NUMBERS 300000 AND ABOVE) (Cont’d)
1.
Disconnect brake line (4) from caliper fitting (8) on right caliper (7).
2.
Disconnect brake line (4) from tee fitting (12) on brake line (1).
3.
Remove capscrew (6), washer (5), clamp (3), and brake line (4) from rear crossmember bracket (2).
4.
Disconnect brake line (11) from caliper fitting (10) on left caliper (9).
5.
Disconnect brake line (11) from tee fitting (12).
1.
Connect brake line (11) to tee fitting (12).
2.
Connect brake line (11) to caliper fitting (10) of left caliper (9). Tighten to 8 lb-ft (11 N
•
m).
3.
Install brake line (4) on rear crossmember bracket (2) with clamp (3), capscrew (6), and washer (5).
4.
Connect brake line (4) to tee fitting (12) on brake line (1).
5.
Connect brake line (4) to caliper fitting (8) of right caliper (7). Tighten to 8 lb-ft (11 N
•
m).
d. Rear Caliper Brake Line Installation
c. Rear Caliper Brake Line Removal
Back to Top
