TB-9-2320-335-13-P

TRUCK, UTILITY: EXPANDED CAPACITY, IAP/ARMOR READY

TECHNICAL BULLETIN; OPERATOR AND FIELD MAINTENANCE AND REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL) INSTRUCTIONS

MAY 2008

TB-9-2320-335-13-P - Page 338 of 680

TB 9-2320-335-13&P

19-6

19-3.1. TRANSMISSION/TRANSFER CASE ASSEMBLY REMOVAL

(SERIAL NUMBERS 300000 AND ABOVE) (Cont’d)

NOTE

It will be necessary to rotate flywheel clockwise from capscrew in

front of crankshaft to gain access to capscrews securing torque

converter.

15.

Remove six capscrews (2) from torque converter (1) and flywheel (3) and slide torque converter (1)

away from flywheel (3).

CAUTION

Safety chain must be routed under transmission oil cooler lines or

damage may result.

16.

Support transmission (7) with transmission jack and secure with safety chain.

17.

Remove two capscrews (23) and lockwashers (24) from transmission adapter (15) and mount (22).

18.

Remove locknut (21), washer (20), capscrew (17), washer (18), and bypass valve (16) from right side

of crossmember (27) and support bracket (19). Discard locknut (21).

19.

Remove locknut (25), washer (26), washer (14), stud (13), and washer (12) from left side of

crossmember (27) and support bracket (11) and lower crossmember (27). Discard locknut (25).

CAUTION

• If transmission is lowered too far, geared fan drive damage

will result.

• Wood block must completely cover bottom of engine oil pan or

oil pan damage will result.

20.

Lower transmission (7) slightly and support engine under oil pan (10) with block and stand.

21.

Disconnect main vent line (6) from transmission/transfer case vent line (8).

22.

Remove four capscrews (9) and two studs (5) from transmission (7) and engine (4).